CED VideoDisc and Player Discussion Forum Index CED VideoDisc and Player Discussion
Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.

Click on the Register link to join.
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Right! Replaced the Servo Belt - still not advancing...

 
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General
View previous topic :: View next topic  
Author Message
Lost Monkey



Joined: 04 Oct 2006
Posts: 4
PostPosted: Thu Nov 23, 2006 10:36 pm    Post subject: Right! Replaced the Servo Belt - still not advancing... Reply with quote
1st off - thanks to Tom for sending the belt quickly and with some neato swag!

2nd - I replaced the servo belt - my machine shows symptoms of a worn servo belt (and it was) - but after replacing it, I find that the servo motor will not advance the arm without a little coaxing to get it started... the motor works - it just doesn't seem to have enough mustard to get the ball rolling...

I am going to try re-lubing all the moving parts in the path, but barring that- I can't see what else could be an issue..
Back to top
View user's profile Send private message
trackerman



Joined: 07 Mar 2007
Posts: 1
PostPosted: Thu Mar 08, 2007 1:14 am    Post subject: Servo Drive....still not advancing Reply with quote
I have the exact same problem. Replaced the belt because it was slipping, and now it sticks unless I give it a boost. I have lubed everything I can think of, but nothing has helped. I wonder now if the servo drive itself needs replacement. It seems as though the servo drive has enough torque to run after it is started, but not enough break away torque to start from a stopped state. Did you ever resolve this issue?
Back to top
View user's profile Send private message
CEDatum



Joined: 29 May 2004
Posts: 104
Location: South Central Indiana, USA.
PostPosted: Thu Mar 29, 2007 4:07 am    Post subject: RCA F/G line player function motor belt Reply with quote
Order the RCA belt 149045. This will fix your belt problem.

Daxi Don
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group