View previous topic :: View next topic |
Author |
Message |
mrfujidoesacid
Joined: 02 Feb 2015 Posts: 4 Location: United States
|
Posted: Mon Feb 02, 2015 11:49 am Post subject: Load problem Selectavision SFT100 |
|
|
I recently sold a working Selectavision on eBay. The buyer emailed me after receiving it and said it wouldn't load the included disc past four inches, then emailed me a photo of what looked like a metal obtrusion with rubber bands around it possibly blocking insertion, as the culprit.
Any idea what this could possibly be?
Thanks in advance! |
|
Back to top |
|
|
blindfury420
Joined: 26 Jan 2011 Posts: 1036
|
Posted: Mon Feb 02, 2015 1:44 pm Post subject: |
|
|
Can you post the pictures or email them? _________________ I dont own
McMicheal 5001h
Hitachi VIP202P
JCP 686-5705
RCA SKT265, SKT300
RCA SJT400X, SJT425 |
|
Back to top |
|
|
SelectaVision420
Joined: 25 Mar 2012 Posts: 1424 Location: Hartford
|
Posted: Mon Feb 02, 2015 5:37 pm Post subject: |
|
|
was it an autoloading player and was it shipped with shipping locks? _________________ (2)Sears 274 & 934(80150,10&11350), sft100, sgt250, sjt 090-400, vp550, VDR3000, VP2000 & 4000
complete '84 Dimensia Owner |
|
Back to top |
|
|
mrfujidoesacid
Joined: 02 Feb 2015 Posts: 4 Location: United States
|
|
Back to top |
|
|
mrfujidoesacid
Joined: 02 Feb 2015 Posts: 4 Location: United States
|
Posted: Mon Feb 02, 2015 5:44 pm Post subject: |
|
|
Guessing it's an autoloading because all you do is slip the videodisc in and remove the empty case. Not sure about shipping locks. I'm really not an expert on these things. I found it at a garage sale. I tested the player before sending it and it played, rewound and fast-forwarded, and loaded/unloaded smoothly. Plus I had it professionally packed before shipping it FedEx. If it is a common problem I'd like to give the buyers a fix. I'm gonna be out at least 75 dollars otherwise. |
|
Back to top |
|
|
SelectaVision420
Joined: 25 Mar 2012 Posts: 1424 Location: Hartford
|
Posted: Mon Feb 02, 2015 6:32 pm Post subject: |
|
|
by autoloading, i mean the machine actually takes the caddy in and pushes it back out, all of the other models you have to manually push the caddy in and remove it.
here is a guide of all the players, in the picture it looks like and sft 100, or an sgt model... the kind with a big "lightswitch" on the right side.
http://www.cedmagic.com/museum/ced-player-guide/ced-player-guide.html
_________________ (2)Sears 274 & 934(80150,10&11350), sft100, sgt250, sjt 090-400, vp550, VDR3000, VP2000 & 4000
complete '84 Dimensia Owner |
|
Back to top |
|
|
blindfury420
Joined: 26 Jan 2011 Posts: 1036
|
Posted: Mon Feb 02, 2015 6:51 pm Post subject: |
|
|
It's super hard to tell but it looks like the underneath of the turntable. I think turntable belt is what looks like a rubberband. It looks like it is on an angle that it shouldn't be on. It is possible the turntable popped out of place during shipping and its stuck up, blocking the disc from going in. I would need better pictures with the top off This is also assuming its a certain kind of player. I could be very wrong without more knowledge of the kind of player and a few pictures of problem
Is that a view from the front of the player through the disc slot? _________________ I dont own
McMicheal 5001h
Hitachi VIP202P
JCP 686-5705
RCA SKT265, SKT300
RCA SJT400X, SJT425 |
|
Back to top |
|
|
mrfujidoesacid
Joined: 02 Feb 2015 Posts: 4 Location: United States
|
Posted: Tue Feb 03, 2015 6:35 am Post subject: |
|
|
Okay, it's definitely not an autoloader then. And that is a photo of it through the slot. I'm going to have to ask for more photos from the buyer.
Is a dislodged turntable something that could be fixed easily? |
|
Back to top |
|
|
blindfury420
Joined: 26 Jan 2011 Posts: 1036
|
Posted: Tue Feb 03, 2015 10:04 am Post subject: |
|
|
A dislodged turntable can be very easy to fix but can also be tricky if any of the shaft bearings moved. Then it would be just a matter of lining them up with the shaft and puttin it in! _________________ I dont own
McMicheal 5001h
Hitachi VIP202P
JCP 686-5705
RCA SKT265, SKT300
RCA SJT400X, SJT425 |
|
Back to top |
|
|
|