View previous topic :: View next topic |
Author |
Message |
robertmedl
Joined: 20 Jan 2015 Posts: 5
|
|
Back to top |
|
|
SelectaVision420
Joined: 25 Mar 2012 Posts: 1424 Location: Hartford
|
Posted: Tue Jan 20, 2015 5:10 pm Post subject: |
|
|
hi there! most likely its the function belt in your case as well, but on the j models the gear sets are on the right hand side of the chassis in the front corner, you should need a phillips driver to undo the cage for the belt and pulleys, its a quick and easy job! _________________ (2)Sears 274 & 934(80150,10&11350), sft100, sgt250, sjt 090-400, vp550, VDR3000, VP2000 & 4000
complete '84 Dimensia Owner |
|
Back to top |
|
|
robertmedl
Joined: 20 Jan 2015 Posts: 5
|
Posted: Wed Jan 21, 2015 7:03 am Post subject: |
|
|
Thanks for the clarification. That makes sense now.
Can you point me to a part number for the belt that I need, and/or a web site where I can purchase one? Or perhaps they are available on eBay? |
|
Back to top |
|
|
robertmedl
Joined: 20 Jan 2015 Posts: 5
|
|
Back to top |
|
|
cedmagic Site Admin
Joined: 11 May 2004 Posts: 335 Location: Portland, Oregon
|
|
Back to top |
|
|
SelectaVision420
Joined: 25 Mar 2012 Posts: 1424 Location: Hartford
|
Posted: Wed Jan 21, 2015 5:57 pm Post subject: |
|
|
sorry, i gave the wrong location, the picture shows it at the other corner, its been a little while since i had the cover off one haha _________________ (2)Sears 274 & 934(80150,10&11350), sft100, sgt250, sjt 090-400, vp550, VDR3000, VP2000 & 4000
complete '84 Dimensia Owner |
|
Back to top |
|
|
robertmedl
Joined: 20 Jan 2015 Posts: 5
|
Posted: Thu Jan 22, 2015 7:40 am Post subject: Re: RE: SASE Belt Service |
|
|
Thanks! |
|
Back to top |
|
|
|