CED VideoDisc and Player Discussion Forum Index CED VideoDisc and Player Discussion
Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.

Click on the Register link to join.
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Trouble loading disc in SGT 250 machine

 
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General
View previous topic :: View next topic  
Author Message
musicwerk



Joined: 30 Apr 2013
Posts: 19

PostPosted: Fri Mar 14, 2014 8:20 am    Post subject: Trouble loading disc in SGT 250 machine Reply with quote

Hi all!
When i went to load Side 2 of a disc, my newly acquired player wouldn't extract the disc from the caddy. I tried reloading side 1, but no dice. I tried a second disc, and the same thing happened. I was told that I had to push the caddy in until it clicked - is there something I'm missing, or am I in trouble?
EDIT - the caddy will go all the way in, I hear a sort of click, but it doesn't extract.
Back to top
View user's profile Send private message
musicwerk



Joined: 30 Apr 2013
Posts: 19

PostPosted: Fri Mar 14, 2014 1:58 pm    Post subject: Reply with quote

Update - it worked again after a few failed attempts, hopefully it was a fluke and I won't have to investigate further Smile
Back to top
View user's profile Send private message
Rixrex



Joined: 28 May 2004
Posts: 1222

PostPosted: Fri Mar 14, 2014 4:56 pm    Post subject: Reply with quote

The system that lifts up the latches that grab the caddy are getting stuck.

It's a system of tension springs with latches and tabs on a shaft that runs the length of the player's back area. Sometimes the shaft gets stuck a bit where its supposed to roll. It needs cleaning and lube and that will probably make it all okay.
Back to top
View user's profile Send private message Send e-mail
musicwerk



Joined: 30 Apr 2013
Posts: 19

PostPosted: Fri Mar 14, 2014 5:21 pm    Post subject: Reply with quote

Terrific, thanks so much for the info! Is there an advisable way for me to get at that mechanism?
Back to top
View user's profile Send private message
Rixrex



Joined: 28 May 2004
Posts: 1222

PostPosted: Sat Mar 15, 2014 7:32 am    Post subject: Reply with quote

This tells you how to fix the problem.

http://www.cedmagic.com/tech-info/repair-solutions.html#caddy-latch-fails-to-engage

To access the internals, you must remove the hex screws from the bottom, located near the edges, and the three screws from the back of player. Then lift the case cover up and forward to get it off.
Back to top
View user's profile Send private message Send e-mail
musicwerk



Joined: 30 Apr 2013
Posts: 19

PostPosted: Sat Mar 15, 2014 9:19 am    Post subject: Reply with quote

Terrific, thank you - I really appreciate it!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group