 |
CED VideoDisc and Player Discussion
Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.
Click on the Register link to join.
|
| View previous topic :: View next topic |
| Author |
Message |
CEDvince
Joined: 23 Jun 2013
Posts: 70
|
 Posted: Mon Nov 18, 2013 10:39 pm Post subject: Weird Problem |
 |
|
So I just got all three of my SKT-090's working (yay for melted function belts). Anyway, one seems to have an odd problem:
When I press fast forward, it will fast forward, but when you let go of the button it ejects the disk, just like if you had hit the reject button.
However, if you just let a disk play through, it has no problems. Any ideas?
_________________
2 - RCA SFT-100
Zenith VP-2000
Realistic CED-1
2 - RCA SGT-200
2-RCA SJT-400 |
|
| Back to top |
|
 |
SelectaVision420
Joined: 25 Mar 2012
Posts: 1226
Location: Hartford
|
| Posted: Tue Nov 19, 2013 5:29 am Post subject: |
|
|
that sounds like a circuitry error... im intruiged by that, ill see if my service manual has anything to say about that...
_________________
Sears 274 & 934(80150,10&11350),sft100,sgt250,sjt090,100,101,200,300,400,vp550, VP4000!
caddy.daddy.fleetwood@gmail.com |
|
| Back to top |
|
|
Rixrex
Joined: 28 May 2004
Posts: 1222
|
| Posted: Tue Nov 19, 2013 8:26 am Post subject: |
|
|
Yep, or somehow the pressing of the one button activates the other as well, due to a problem within the front panel or the buttons...
The two buttons are close together and if you actually did activate both at the same time, and held down the fast forward, then the fast forward mode would be active until you let go, which would then allow the reject to operate. |
|
| Back to top |
|
|
SelectaVision420
Joined: 25 Mar 2012
Posts: 1226
Location: Hartford
|
| Posted: Tue Nov 19, 2013 10:30 am Post subject: |
|
|
| Rixrex wrote: | Yep, or somehow the pressing of the one button activates the other as well, due to a problem within the front panel or the buttons...
The two buttons are close together and if you actually did activate both at the same time, and held down the fast forward, then the fast forward mode would be active until you let go, which would then allow the reject to operate. |
they are separated by pause, but the panel still could be shorted somehwere
_________________
Sears 274 & 934(80150,10&11350),sft100,sgt250,sjt090,100,101,200,300,400,vp550, VP4000!
caddy.daddy.fleetwood@gmail.com |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
