CED VideoDisc and Player Discussion

[mxpxpunkrock1987]

i have a ced player thats been sitting for years my dad we took it apart to find belts no good ? i have the gear box that moves the stylus apart and i have a sgt100w for parts but theres a cloth in the clutch that engauges to move the stylus read head back and forth the cloths and both machine are broken where can i get this so i can replace the one in mine and also my picture jumps and skips could that be why or can it be the turn table remember this machine has been sitting for 30 years and the only reason it was put away some one broke the stylus i just bought one off ebay just for parts and i have another one i plan to keep as my own so my dad has his own i'm a collector like him and i'm treasuring the technology of the olden days



yes the little round cloth u see there is the clutch it has double sided tape and this one is no good from sitting same with the other one

[mxpxpunkrock1987]

got a new part for the track (read head) to engage and move from cedatum (john) so thats fixed only issue now turn table belt is streched did the amonia no go still stumbles around and jumps so needs new belt but after 30 years i'm surprised it runs i have to replace some parts used the track motor gears from the sgt to fix the sft but what can u do rca did a poor job on there would be nice if you could adjust the band belt below cause i used a rolor and some metal and the picture came perfect comon cause of the stumble and color so i'm gona make a bracket with a rolor cause there no need for the belt track clip

[Rixrex]

I've often thought about replacing that clip with a tension roller of sorts to tighten the belt. But I just went to SJT - SKT models instead.

Glad to hear that it worked!