 |
CED VideoDisc and Player Discussion
Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.
Click on the Register link to join.
|
| View previous topic :: View next topic |
| Author |
Message |
blindfury420
Joined: 26 Jan 2011
Posts: 1036
|
 Posted: Wed Apr 04, 2012 11:50 am Post subject: Hitachi model problems |
 |
|
I have 4 different hitachi style players, I will get the model numbers if any one thinks I can even go farther with possible fixes, but all exhibit same problem no matter what stylii is installed.
The problem is they will randomly let the stylus arm stop where disc starts and start to play it, other wise 90% of the time they fly through disc and you can hear timing belt or something in back savagely clicking haha and I can see stylus tip never drop onto disc and if I unplug while stylus arm is flying to end it stops the arm, then I plug player back in and it drops stylus tip and actually plays!!! Why would it do this?
Plus one has audio but no video its super streaky black and white stripes. Any one know problem or fix? If its getting parts from broke players it's no problem!
_________________
I dont own
McMicheal 5001h
Hitachi VIP202P
JCP 686-5705
RCA SKT265, SKT300
RCA SJT400X, SJT425 |
|
| Back to top |
|
 |
Rixrex
Joined: 28 May 2004
Posts: 1222
|
| Posted: Wed Apr 04, 2012 1:23 pm Post subject: |
|
|
| Is the stylus good? |
|
| Back to top |
|
|
blindfury420
Joined: 26 Jan 2011
Posts: 1036
|
| Posted: Wed Apr 04, 2012 5:48 pm Post subject: |
|
|
3 rebuilds/cleans from cedatum, 2 nos in box, and finally 3 known working good ones. All 8 get same result 
_________________
I dont own
McMicheal 5001h
Hitachi VIP202P
JCP 686-5705
RCA SKT265, SKT300
RCA SJT400X, SJT425 |
|
| Back to top |
|
|
Rixrex
Joined: 28 May 2004
Posts: 1222
|
| Posted: Thu Apr 05, 2012 3:16 pm Post subject: |
|
|
In that case, I would think it's a problem where the signal from the disc isn't being recognized to allow proper synchronization of the arm drive motor to move the stylus forward at the correct speed. Or maybe the arm drive has a problem within its system somewhere.
When this happens with and SFT/SGT model, it's typically the sync belt worn out or loose. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
