| View previous topic :: View next topic |
| Author |
Message |
Nokes
Joined: 19 Jun 2010
Posts: 11
Location: Alliston, Ontario, Canada
|
 Posted: Mon Feb 06, 2012 8:56 pm Post subject: What's wrong with my 'shiba? |
 |
|
I have recently fixed my dad's old Toshiba VP100, brand new belts and drive pulleys. Most of the time, it reads a disc no problem, but sometimes, it just doesn't pick anything up, but after leaving for an hour or so, it's ready to go again.
Is this a common problem?
Can I fix this? How?
Thanks in advance |
|
| Back to top |
|
 |
blindfury420
Joined: 26 Jan 2011
Posts: 1036
|
| Posted: Tue Feb 07, 2012 5:24 pm Post subject: |
|
|
personally I have had 3 toshiba's, 1 wards, and 1 elmo, all clone/shiba player's go through my hands and I have never seen that problem. I wish I knew but I can try and help ya
What exactly happens when it stops working? Does the turntable still spin? Does the stylus arm move? What does the LCD display do when it stops working? Have you tried another stylus?
_________________
I dont own
McMicheal 5001h
Hitachi VIP202P
JCP 686-5705
RCA SKT265, SKT300
RCA SJT400X, SJT425 |
|
| Back to top |
|
|
Nokes
Joined: 19 Jun 2010
Posts: 11
Location: Alliston, Ontario, Canada
|
| Posted: Wed Feb 08, 2012 10:31 pm Post subject: |
|
|
It keeps spinning, I don't think the Stylus arm moves, the LED display shows "- -" as if it's still loading, I don't have any other styluses to try.
_________________
Toshiba VP-100 est Tres Magnifique! |
|
| Back to top |
|
|
rideauwrangler
Joined: 07 Feb 2012
Posts: 46
Location: Ottawa, Ontario
|
| Posted: Thu Feb 09, 2012 7:48 am Post subject: |
|
|
| I also have 2 shiba's in my stockpile and neither of them work. I'm going to try to figure things as I really want them working out but I may pick your brain on your experience with these players... |
|
| Back to top |
|
|
Nokes
Joined: 19 Jun 2010
Posts: 11
Location: Alliston, Ontario, Canada
|
| Posted: Thu Feb 09, 2012 9:21 pm Post subject: |
|
|
I'll help as much as I can, but Last time I saw this machine working properly, I was learning to walk
_________________
Toshiba VP-100 est Tres Magnifique! |
|
| Back to top |
|
|
cbertra2
Joined: 29 Dec 2004
Posts: 160
|
| Posted: Fri Feb 10, 2012 1:40 pm Post subject: |
|
|
| Nokes wrote: | | It keeps spinning, I don't think the Stylus arm moves, the LED display shows "- -" as if it's still loading, I don't have any other styluses to try. |
Pull the top off and look at the tracking arm. In a free state the arm should be perpendicular to the guide rods or rod. you can check it with a square if need be. I have had this happen to two Toshiba players. During shipping or just a good jolt the arm is so flimsy that the arm gets bent so that when the arm moves to the disc the stylus drops and it doesn't pick up a signal. The stylus automaticly retracts back up and the turntable continues to spin and the display shows "--". I gently bent the arm back to square and that cured the problem on both players. |
|
| Back to top |
|
|
Nokes
Joined: 19 Jun 2010
Posts: 11
Location: Alliston, Ontario, Canada
|
| Posted: Sun Feb 12, 2012 5:17 am Post subject: |
|
|
Thanks, I'll try that and report back
_________________
Toshiba VP-100 est Tres Magnifique! |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
