CED VideoDisc and Player Discussion Forum Index CED VideoDisc and Player Discussion
Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.

Click on the Register link to join.
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Are these shipping screws for a CED player?

 
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General
View previous topic :: View next topic  
Author Message
dumbchemist



Joined: 27 Oct 2011
Posts: 268
Location: Central New York
PostPosted: Fri Oct 28, 2011 7:16 am    Post subject: Are these shipping screws for a CED player? Reply with quote
The photo below is of 2 shipping screws which I think are for a CED player. If they are, what player would they fit? I am not sure; but, I think they are for an RCA player.

http://i1141.photobucket.com/albums/n581/dumbchemist/P1010035.jpg

The tag reads

"BEFORE USE"
Remove this metal shipping tag. TURN LEFT and PULL DOWN.
Back to top
View user's profile Send private message
Rixrex



Joined: 28 May 2004
Posts: 1222
PostPosted: Fri Oct 28, 2011 7:29 am    Post subject: Reply with quote
Yes, those are the shipping tabs used for the SJT/SKT models.

Shipping screws can take the place of these tabs. The screws are merely 1 1/4 to 1 1/2 inch screws that can be place into the two bottom holes to secure the stylus arm, like these:

http://www.ebay.com/itm/Selectavision-Player-S-J-K-T-X00-Shipping-Screws-/160569055260?pt=Vintage_Electronics_R2&hash=item2562a9581c
Back to top
View user's profile Send private message Send e-mail
dumbchemist



Joined: 27 Oct 2011
Posts: 268
Location: Central New York
PostPosted: Fri Oct 28, 2011 7:46 am    Post subject: Reply with quote
Thanks for clearing this up for me. I think that they were used on an SJT-200 player that I got from a Washington state refurbisher. It has been so long that I don't remember the name of the company. Well, I will keep these anyway.

What shipping screws were used on Sears Hitachi players?
Back to top
View user's profile Send private message
Rixrex



Joined: 28 May 2004
Posts: 1222
PostPosted: Fri Oct 28, 2011 8:35 pm    Post subject: Reply with quote
They used a screw to hold down the stylus hatch and arm, and a plastic insert to secure the disc load tray.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group