|
CED VideoDisc and Player Discussion Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.
Click on the Register link to join.
|
View previous topic :: View next topic |
Author |
Message |
73thing
Joined: 29 Jan 2006 Posts: 1
|
Posted: Sun Jan 29, 2006 6:23 pm Post subject: help with sft100w |
|
|
Just aquired a sft100w and need some help. The unit powers up and after inserting ced and switching to play the turntable spins but the stylus arm does not move. I have tried a new stylus and it made no difference. Also when switching to play I have to go a little past the lock position for play to get the turntable to spin. Any help will be appreciated.
Larry |
|
Back to top |
|
|
Guest
|
Posted: Sun Jan 29, 2006 10:07 pm Post subject: |
|
|
Sounds like you have 2 problems.
1. Arm not moving is likely to be the servo belt slipping (located on the right and back, looking at the unit from the front)
2. Switch position problems are because of cam switches that move from their original position.
Both these subjects are covered in more detail on the site in the repair area.
good luck......dcs |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|