|
CED VideoDisc and Player Discussion Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.
Click on the Register link to join.
|
View previous topic :: View next topic |
Author |
Message |
prg333
Joined: 02 Nov 2005 Posts: 3
|
Posted: Wed Nov 02, 2005 7:23 pm Post subject: CED Player SGT 250 Problem Help Please |
|
|
I wonder if anyone can help me with a problem I am having with an SGT-250.The disc loads with no problem,the turntable rises to the correct height and starts spinning.
The LED just shows a red line and the disc will not play and the player does not respond when rapid access or visual search is pushed.
When I opened the plyer I noticed that the arm(where the stylus is) will not move at all when the disc is spinning and the LED shows a single red line.
Any thoughts? Thank you for your advice!
Peter
|
|
Back to top |
|
|
cedmagic Site Admin
Joined: 11 May 2004 Posts: 335 Location: Portland, Oregon
|
Posted: Sun Nov 06, 2005 1:06 pm Post subject: RE: SGT250 with No Playback |
|
|
Peter:
If you have a known-good stylus cartridge and a good servo motor drive belt, then the most likely reason the player is failing to initiate playback is an Improper Stylus Set Down Adjustment. Check out this section of the Repair Solutions Page to learn how to adjust stylus set down:
http://www.cedmagic.com/tech-info/repair-solutions.html#improper-stylus-set-down-adjustment
--Tom Howe |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|