CED VideoDisc and Player Discussion Forum Index CED VideoDisc and Player Discussion
Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.

Click on the Register link to join.
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Toshiba VP-100C pcb board

 
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General
View previous topic :: View next topic  
Author Message
Lakota305
Guest





PostPosted: Wed Aug 10, 2005 5:29 pm    Post subject: Toshiba VP-100C pcb board Reply with quote

I hope someone can help me with this one. I have a Toshiba VP-100C player, and I removed the pcb board so I can replace the belt. Like a moron I didn't label or mark where the plugs go back and now I have no player that works. Can someone find or send me a picture that's really sharp of the top of the pcb board all connected? That's my only reference.

Lakota305@gmail.com
Back to top
Ron Rendfeld
Guest





PostPosted: Thu Aug 11, 2005 6:42 pm    Post subject: Toshiba Reply with quote

Go to CED Magic Home Page>
Scroll down to "Technical Information"
Look at "TOSHIBA Turntable Motor Pulley Replacement">
Scroll to pictures I think the photos are what you need to figure out how to hook up the wires.

Ron in Indy
Back to top
TRENT310
Guest





PostPosted: Sat Oct 08, 2005 11:48 am    Post subject: Reply with quote

Wow, I have a VP-100 which just lights up 'side 1' (or 2, depending) and does nothing at all. I don't hear anything moving either. I'm going to open it up and see what's going on.

Confused
Back to top
Guest






PostPosted: Sat Oct 08, 2005 7:19 pm    Post subject: Reply with quote

TRENT310 wrote:
Wow, I have a VP-100 which just lights up 'side 1' (or 2, depending) and does nothing at all. I don't hear anything moving either. I'm going to open it up and see what's going on.

Confused


Oh, the fix was simple. The black piece of metal cover is supposed to 'pop up' to prevent you from inserting another caddy while one is already in there. It doesn't do that, (jammed?) so I just removed the switch. It works just as fine and I should know better than to put something in while the 'stand by' light is on.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group