CED VideoDisc and Player Discussion

[saskatoonguy]

My SGT 200 is having two issues, the colour occasionally drops out and the caddy loading arm sometimes stays stuck down.

The colour is the turntable dropping in rpm I believe, it all started when I flipped it over and opened it one night to see why the caddy arm stuck. I opened it up last night and lubricated the turntable shaft, following the instructions on the site, left it for 24 hours. I am still having the issue, I know somebody must have fixed one or two of these. The audio also makes a really soft thud when the colour goes in and out. I am hoping there is something else I can look at as opposed to changing the belt, that seems rather painful. Also when I switch it to load it squeaks now and seems to stop quicker.

The second issue is with the caddy latch arm, the instructions on the site weren't that clear and I was unable to remove the thick white arm (which is the thing getting stuck not sure if it's the right part...) I never noticed any wax or residue on any of the parts but still put a bit grease on all the pivot points. The arm seemed to pop up and down no problem but after watching one side it wouldn't grab the caddy. After unhooking the unit and moving it I heard the latch pop up when I set it down again (gently)

Anybody have any experience fixing these? Any insight would be a great help. Thanks!!

[Beetlescott]

I can't help with the issues you are having with your player, but I still wante to say welcome to the site! I'm so excited at the amount of people who are joining in on this great format! I'm sure someone will have some answeres for you, just keep checking back!!!!!! WELCOME!
_________________
1000 titles
SGT-250
SJT-400
Montgomery Ward
SGT-100