CED VideoDisc and Player Discussion Forum Index CED VideoDisc and Player Discussion
Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.

Click on the Register link to join.
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Putting on new belts

 
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General
View previous topic :: View next topic  
Author Message
ibwilkee



Joined: 04 May 2005
Posts: 4
Location: Akron, Ohio
PostPosted: Wed May 04, 2005 4:00 pm    Post subject: Putting on new belts Reply with quote
I bought a Sears CED player on Ebay and it did not work. I bought 3 new belts and am in the process of putting them on. The loading belt was in a figure 8, the arm drive belt was stretched very badly, and the timing belt was oblong. I put the belts on, but the stylus arm will not return. I noticed the timing belt seemed to be looped thru finger like things on the sliding part of the stylus arm. I did not loop it thru because it did not seem right. My question is it supposed to be looped and if so--how. If any one can answer my question and or send me a diagram, I would be greatful.

Thanks so much

ibwilkee@juno.com
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group