|
CED VideoDisc and Player Discussion Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.
Click on the Register link to join.
|
View previous topic :: View next topic |
Author |
Message |
ibwilkee
Joined: 04 May 2005 Posts: 4 Location: Akron, Ohio
|
Posted: Wed May 04, 2005 4:00 pm Post subject: Putting on new belts |
|
|
I bought a Sears CED player on Ebay and it did not work. I bought 3 new belts and am in the process of putting them on. The loading belt was in a figure 8, the arm drive belt was stretched very badly, and the timing belt was oblong. I put the belts on, but the stylus arm will not return. I noticed the timing belt seemed to be looped thru finger like things on the sliding part of the stylus arm. I did not loop it thru because it did not seem right. My question is it supposed to be looped and if so--how. If any one can answer my question and or send me a diagram, I would be greatful.
Thanks so much
ibwilkee@juno.com |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|