CED VideoDisc and Player Discussion Forum Index CED VideoDisc and Player Discussion
Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.

Click on the Register link to join.
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Disc covers

 
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General
View previous topic :: View next topic  
Author Message
Ron Rendfeld
Guest





PostPosted: Tue Feb 01, 2005 12:05 pm    Post subject: Disc covers Reply with quote

Anyone know how to replace the fabric strips on the inside of the disc cover?
Back to top
cedmagic
Site Admin


Joined: 11 May 2004
Posts: 335
Location: Portland, Oregon

PostPosted: Wed Feb 23, 2005 4:26 pm    Post subject: Re: Disc covers Reply with quote

Ron Rendfeld wrote:
Anyone know how to replace the fabric strips on the inside of the disc cover?


If the felt strip is merely loose on one or both ends, it can usually be carefully glued back down with Elmer's glue. Just be sure to use as little adhesive as possible, and don't get any on top of the felt where it might scratch the disc when dry.

If the felt strip is in really bad shape, it can be pulled off entirely. Make sure there aren't any burrs left over when you do this by running a finger along the depression from which the strip was removed. Since the rim and center hub of the disc are raised above the grooves, the disc can safely slide past a smooth caddy opening, even with no felt in place.

These felt strips were specifically manufactured for VideoDisc caddies, and were peeled off a sheet by a human operator who then applied them to a machine that in turn inserted them into the caddy depression. The process can be seen at about the 10-minute mark in the CED manufacturing movie:

http://www.cedmagic.com/home/ced-manufacturing-page.html

I've never tried to find a modern replacement for the felt strips, although they could probably be improvised from a thin self-adhesive felt sheet using an exacto knife.

--Tom Howe
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group