CED VideoDisc and Player Discussion Forum Index CED VideoDisc and Player Discussion
Forum topics can be anything related to SelectaVision CED's, and could include offers to buy/sell/trade, repair advice, historical anecdotes, caches of CED's you've discovered, etc.

Click on the Register link to join.
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

sft100 servo belts

 
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General
View previous topic :: View next topic  
Author Message
Wendell2017



Joined: 29 May 2017
Posts: 7
Location: Oxford,Nova Scotia

PostPosted: Fri Jun 09, 2017 6:21 am    Post subject: sft100 servo belts Reply with quote

I located and bought 2 servo belts there not pre stretched but I may have an option to fix that by that by removing the motor and drilling new holes to mount it closer to other shaft, I had spoke with a friend of the family that was into ced many years ago says may not be a good idea to try but I figure I will do what must be done to make it work again.

And my family's friend has 1000 ced movies to give me he lost his machines in the flood of 2003 here
Back to top
View user's profile Send private message
jsdspif



Joined: 16 Jan 2016
Posts: 276

PostPosted: Thu Jun 15, 2017 5:00 am    Post subject: Reply with quote

i wouldn't change the position of the motor. http://www.cedmagic.com/home/products.html that is the page with instructions to have 2 pre-stretched belts sent to you for free. Or you may try it with the belt you have and see if it works. Or put one of yours on a 1" dowel for a month or so and try it. the site states he uses a 15/16" dowel for a number of months but I don't know why a 1" dowel for a month would hurt anything. drilling new holes and what not, I'd save that as a really last ditch effort.
Back to top
View user's profile Send private message
Wendell2017



Joined: 29 May 2017
Posts: 7
Location: Oxford,Nova Scotia

PostPosted: Sun Jun 18, 2017 9:39 pm    Post subject: Reply with quote

I tried stretching the belt for about month now and its still quite tight the motor wont spin so I did mod it to allow the motor to mounted closer to the other gear and shaft and it works fine
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    CED VideoDisc and Player Discussion Forum Index -> General All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group