CED VideoDisc and Player Discussion

[dumbchemist]

I was wondering if the remote control for the SJT-300 player would work with the SJT-400 player and vice versa. I don;t have an SJT-300 player; but, I do have the remote control for it. I have an SJT-400 player and its remote though the player needs some repair work right now so I cannot test the remotes.

Has anyone tried the above?
_________________
Sears 934-54780150 & 934.54810350,
Realistic CED-1
1-SJT-400. 2-SJT-200 & 1-SJT-090.
CLD-D406, CLD-980.
MDP-600, MDP-MR1.

[ketonic_dude]

I've often wondered that too. I don't think they are. I'm pretty sure you can use a SJT-300 remote with a SGT-250 and vice versa as I have seen people sell them like that. Not sure if the SJT-400, SKT-400 or Digital Command Center remotes would work with the SJT-300 or SGT-250. I have all 4 of those machines so I could test this but it would take some time to get them all hooked up and see what works with which player. But when I get some time I'll give it a shot. I only have a SJT remote though, no SKT remote. But I assume since the SJT remote works with the SKT player than any player that works with the SJT remote would work with the SKT remote. That's a lot of S's and T's. lol

[kitchensynch]

As I understood when I looked it up, there are universals that are programmed to operate RCA CED players...I have a One4All (OFA) Cinema 7 and a couple others I think will work but I would wonder if those codes are still included in more modern ones or if they need to be added to programmable remotes.

A really good site to learn about this, and it has forums too, is remotecentral.com
_________________
A New Vista of RCA Victor COLOR!

[Jesse Skeen]

The 400's remote codes are different, but all the other RCA players work with the same remotes.
_________________
Videodisc and stereo sound- there's no better value around!

[dumbchemist]

So if I reading everyone right, the remote for the SJT-300 (Selectavision Videodisc Remote) will work on those RCA CED players that can receive remote commands and will not work with the SJT-400. The SJT-400 uses the Selectavision Random Access Control Center. Nice to know. I have 3 of the Random Access Control Centers and one Videodisc remote FWIW.
_________________
Sears 934-54780150 & 934.54810350,
Realistic CED-1
1-SJT-400. 2-SJT-200 & 1-SJT-090.
CLD-D406, CLD-980.
MDP-600, MDP-MR1.

[SelectaVision420]

the g250, j300 and k300 all share a remote. the j/k 400's remote is in its own realm. i thought i read somewhere that the j/k 400 remote sends different wavelength transmissions and i believe there are 2 transmitters on the big remote. i was doing a lot of remote research on here a few years ago but the data is limited. i think basically the stick remote sends out an infra red pulse based on the given button pushed ( which is more analog based ), while the big brick puts out some sort of more digital based info ( mainly because of the shear amount of buttons, they had to do this to stop from repeating common infra red freq's...

but dont quote me on that...
_________________
Sears 274 & 934(80150,10&11350),sft100,sgt250,sjt090,100,101,200,300,400,vp550, VP4000!
caddy.daddy.fleetwood@gmail.com

[cbertra2]

My $300.00 Logitech remote has no codes for my SJT & SKT 400 CED player and I can not transfer any commands from the CED remote to the Logitech. So whatever type of signal is coming from the CED remotes is not compatible with todays programmable remotes.

[kitchensynch]

You might ask on the Remote Central site?
_________________
A New Vista of RCA Victor COLOR!