CED VideoDisc and Player Discussion

Rixrex · Joined: 28 May 2004 Posts: 1222

Hey, guys,

CEDatum has come up with a newly engineered transfer rod coupling that beats the older one by a mile. It's a refined part that still uses the brass pin, but looks better, and is stronger, and has an appearance that matches the original coupling.

This is the part that lifts the transfer rod of the SJT & SKT players, which I often call the disc lift rod, and is connected to the right side gearing assembly. The plastic pin of the part breaks off if the turntable is positioned so that it blocks the lift rod from raising properly.

This is a great part to purchase and have on hand for "just in case" use.

blindfury420 · Joined: 26 Jan 2011 Posts: 1036

I remember telling you about these when you were showing how to drill out the old stem, maybe I am thinking wrong :/ Either way you are correct!! The transfer rod coupling is cedatum makes are strong as hell!
_________________
I dont own

McMicheal 5001h
Hitachi VIP202P
JCP 686-5705
RCA SKT265, SKT300
RCA SJT400X, SJT425

Rixrex · Joined: 28 May 2004 Posts: 1222

The old coupling they had eventually got brittle or something, so they got a new product made from another material. I had three of the old ones, and the tension of the rod spring itself was enough to break two of them before I stopped.

They had very few left in stock apparently and discovered that those were brittle as well. Then remodeled, redesigned a new one that is really great and it's appearance is just right. It looks like a stock part except for the brass pin.

blindfury420 · Joined: 26 Jan 2011 Posts: 1036

I never said it, but when I did talk about them they were the new kind with the brass stem and molded plastic part that actually grabs the disc transfer rod. I always forget something haha! I can remember cedatum showing them to me at one of the workshops!

http://www.cedmagic.com/forum/viewtopic.php?t=1913&highlight=transfer+coupling+rod
_________________
I dont own

McMicheal 5001h
Hitachi VIP202P
JCP 686-5705
RCA SKT265, SKT300
RCA SJT400X, SJT425

Rixrex · Joined: 28 May 2004 Posts: 1222

Yes, but that was the still old version of the replacement part. It had a partly translucent molded part. That molded part eventually became brittle.

The new one is one they just came up with in the last few weeks and sent me a few to test out. It actually has a much better molded part that is much more refined and with sharper details and looks like the original part, and is the right color as well.

blindfury420 · Joined: 26 Jan 2011 Posts: 1036

Yep that sounds different!
_________________
I dont own

McMicheal 5001h
Hitachi VIP202P
JCP 686-5705
RCA SKT265, SKT300
RCA SJT400X, SJT425

blindfury420 · Joined: 26 Jan 2011 Posts: 1036

Does this show the old and new transfer rod coupling rix?

_________________
I dont own

McMicheal 5001h
Hitachi VIP202P
JCP 686-5705
RCA SKT265, SKT300
RCA SJT400X, SJT425

dumbchemist · Joined: 27 Oct 2011 Posts: 546 Location: Central New York

That is nice that there is a new coupling.

However:

HOW DO YOU REPLACE THE OLD COUPLING WITH A NEW ONE?????
_________________
Sears 934.54780150 & 934.54810350
CED-1
Hitachi: VIP2000, 3-VIP1000, VIP201P
GEN10301
RCA SJT-200 SJT-400
DiskLord DP-830

SelectaVision420 · Joined: 25 Mar 2012 Posts: 1424 Location: Hartford

blindfury420 · Joined: 26 Jan 2011 Posts: 1036

I know the brownish looking one is the old one. I assume the newer one is the one above it that has the original color.
_________________
I dont own

McMicheal 5001h
Hitachi VIP202P
JCP 686-5705
RCA SKT265, SKT300
RCA SJT400X, SJT425

Rixrex · Joined: 28 May 2004 Posts: 1222

The new one is that one above, as you thought. See how much finer it is and a beter match to the original.

You don't need to replace the old one with a new one unless the old one breaks. If that happens, then the replacement is pretty easy because you then have room to maneuver.