CED VideoDisc and Player Discussion

HI just wondering if anybody in the UK sell belts I need a set for a Hitachi VIP 202P.

Hi I got the first belts from Tom and they were a lot smaller than the set he just sent me . I think the new belts were to tight and put to much load on the motor when lifting up the carriage and disc ...

Hi sorted it was the new belt I looked at one I did last year and the belt sent this time is twice as thick putting to much load on the motor.

Hello I have just received and fitted a new set of belts to my VIP 202p player and have a problem with the disc eject the disc goes in ok and plays but when you press the reset the disc only starts to ...

Thanks for your reply I found his details now and sent a SAE for the belts.
Barry.

Hi all some time ago I got some belts sent to me from Tom all I had to do was send a stamp addressed envelope and he sent the belts is this still the case from the UK.
My machine is a Hitachi VIP201P ...

Well the arm moves over to the disc and you can advance the arm to a different part of the disc .
It seems to me that the stylus is not making contact with the disc I have set the arm to a hight of a ...

Yes the disc spins up all loads ok and I had tried other discs to.
Still no joy I have a spare machine so I will try changing the arm assy later.

That's what I thought but a have tried two styluses from working machines.
I also get the same resort with or without the stylus in the machine.

Hi I have a Hitachi VIP201P player I have changed the belts and all is now running but for some reason the arm resets to the load position after about 30 secs any ideas would be very helpful.
Barry.

Hi I also had this problem with jumping discs all I do is take the disc out of the caddy and clean it with very mild baby shampoo and rinse and dry works for me every time.

Hi all I'm looking for a remote control unit for a Hitachi VIP201P player if anyone has one kicking around.
Barry.

Got the stamps within 3days very fast service from the U S.

Hello all,
Got hold of one of these machines in the UK but cant seem to find any info on it like when it was made etc.
I have got it going but it need two new belts to do the job properly but still ...

Thanks for your replies I have found them on eBay any idea how many stamps I will need for the return of 2 small belts?
Barry.

Hi all this is my first post I have a CED machine that needs 2 belts but cant get hold of any US stamps in the UK to send to Tom for the replacement belts with a SASE any ideas anyone.
Barry.